dotfiles

Cem's Dotfiles
git clone git://git.ckyln.com/dotfiles.git
Log | Files | Refs | Submodules | README | LICENSE

commit 56c909f02196d7c49fddf3843530cae87b8566e5
parent f7ed95d203cccdceac579e45a0ae07111ab7c0b6
Author: Cem Keylan <cem@ckyln.com>
Date:   Wed, 17 Jul 2019 11:30:17 +0300

init.vim

Diffstat:
A.config/nvim/init.vim | 146+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
D.nvimrc | 139-------------------------------------------------------------------------------
2 files changed, 146 insertions(+), 139 deletions(-)

diff --git a/.config/nvim/init.vim b/.config/nvim/init.vim @@ -0,0 +1,146 @@ +" The default vimrc file. +" +" Maintainer: Bram Moolenaar <Bram@vim.org> +" Last change: 2019 Feb 18 +" +" This is loaded if no vimrc file was found. +" Except when Vim is run with "-u NONE" or "-C". +" Individual settings can be reverted with ":set option&". +" Other commands can be reverted as mentioned below. + +" When started as "evim", evim.vim will already have done these settings. +if v:progname =~? "evim" + finish +endif + +" Bail out if something that ran earlier, e.g. a system wide vimrc, does not +" want Vim to use these default values. +if exists('skip_defaults_vim') + finish +endif + +" Use Vim settings, rather than Vi settings (much better!). +" This must be first, because it changes other options as a side effect. +" Avoid side effects when it was already reset. +if &compatible + set nocompatible +endif + +" When the +eval feature is missing, the set command above will be skipped. +" Use a trick to reset compatible only when the +eval feature is missing. +silent! while 0 + set nocompatible +silent! endwhile + +" Allow backspacing over everything in insert mode. +set backspace=indent,eol,start + +set history=200 " keep 200 lines of command line history +set ruler " show the cursor position all the time +set showcmd " display incomplete commands +set wildmenu " display completion matches in a status line + +set ttimeout " time out for key codes +set ttimeoutlen=100 " wait up to 100ms after Esc for special key + +" Show @@@ in the last line if it is truncated. +set display=truncate + +" Show a few lines of context around the cursor. Note that this makes the +" text scroll if you mouse-click near the start or end of the window. +set scrolloff=5 + +" Do incremental searching when it's possible to timeout. +if has('reltime') + set incsearch +endif + +" Do not recognize octal numbers for Ctrl-A and Ctrl-X, most users find it +" confusing. +set nrformats-=octal + +" For Win32 GUI: remove 't' flag from 'guioptions': no tearoff menu entries. +if has('win32') + set guioptions-=t +endif + +" Don't use Ex mode, use Q for formatting. +" Revert with ":unmap Q". +map Q gq + +" CTRL-U in insert mode deletes a lot. Use CTRL-G u to first break undo, +" so that you can undo CTRL-U after inserting a line break. +" Revert with ":iunmap <C-U>". +inoremap <C-U> <C-G>u<C-U> + +" In many terminal emulators the mouse works just fine. By enabling it you +" can position the cursor, Visually select and scroll with the mouse. +if has('mouse') + set mouse=a +endif + +" Switch syntax highlighting on when the terminal has colors or when using the +" GUI (which always has colors). +if &t_Co > 2 || has("gui_running") + " Revert with ":syntax off". + syntax on + + " I like highlighting strings inside C comments. + " Revert with ":unlet c_comment_strings". + let c_comment_strings=1 +endif + +" Only do this part when Vim was compiled with the +eval feature. +if 1 + + " Enable file type detection. + " Use the default filetype settings, so that mail gets 'tw' set to 72, + " 'cindent' is on in C files, etc. + " Also load indent files, to automatically do language-dependent indenting. + " Revert with ":filetype off". + filetype plugin indent on + + " Put these in an autocmd group, so that you can revert them with: + " ":augroup vimStartup | au! | augroup END" + augroup vimStartup + au! + + " When editing a file, always jump to the last known cursor position. + " Don't do it when the position is invalid, when inside an event handler + " (happens when dropping a file on gvim) and for a commit message (it's + " likely a different one than last time). + autocmd BufReadPost * + \ if line("'\"") >= 1 && line("'\"") <= line("$") && &ft !~# 'commit' + \ | exe "normal! g`\"" + \ | endif + + augroup END + +endif + +" Convenient command to see the difference between the current buffer and the +" file it was loaded from, thus the changes you made. +" Only define it when not defined already. +" Revert with: ":delcommand DiffOrig". +if !exists(":DiffOrig") + command DiffOrig vert new | set bt=nofile | r ++edit # | 0d_ | diffthis + \ | wincmd p | diffthis +endif + +if has('langmap') && exists('+langremap') + " Prevent that the langmap option applies to characters that result from a + " mapping. If set (default), this may break plugins (but it's backward + " compatible). + set nolangremap +endif +set number relativenumber +call plug#begin() +Plug 'mcchrish/nnn.vim' +Plug 'scrooloose/nerdtree' +Plug 'itchyny/lightline.vim' +Plug 'vim-latex/vim-latex' +call plug#end() +map <C-o> :NERDTreeToggle<CR> +filetype plugin indent on +vnoremap <silent><Leader>y "yy <Bar> :call system('xclip', @y)<CR> +set clipboard=unnamedplus diff --git a/.nvimrc b/.nvimrc @@ -1,139 +0,0 @@ -" The default vimrc file. -" -" Maintainer: Bram Moolenaar <Bram@vim.org> -" Last change: 2019 Feb 18 -" -" This is loaded if no vimrc file was found. -" Except when Vim is run with "-u NONE" or "-C". -" Individual settings can be reverted with ":set option&". -" Other commands can be reverted as mentioned below. - -" When started as "evim", evim.vim will already have done these settings. -if v:progname =~? "evim" - finish -endif - -" Bail out if something that ran earlier, e.g. a system wide vimrc, does not -" want Vim to use these default values. -if exists('skip_defaults_vim') - finish -endif - -" Use Vim settings, rather than Vi settings (much better!). -" This must be first, because it changes other options as a side effect. -" Avoid side effects when it was already reset. -if &compatible - set nocompatible -endif - -" When the +eval feature is missing, the set command above will be skipped. -" Use a trick to reset compatible only when the +eval feature is missing. -silent! while 0 - set nocompatible -silent! endwhile - -" Allow backspacing over everything in insert mode. -set backspace=indent,eol,start - -set history=200 " keep 200 lines of command line history -set ruler " show the cursor position all the time -set showcmd " display incomplete commands -set wildmenu " display completion matches in a status line - -set ttimeout " time out for key codes -set ttimeoutlen=100 " wait up to 100ms after Esc for special key - -" Show @@@ in the last line if it is truncated. -set display=truncate - -" Show a few lines of context around the cursor. Note that this makes the -" text scroll if you mouse-click near the start or end of the window. -set scrolloff=5 - -" Do incremental searching when it's possible to timeout. -if has('reltime') - set incsearch -endif - -" Do not recognize octal numbers for Ctrl-A and Ctrl-X, most users find it -" confusing. -set nrformats-=octal - -" For Win32 GUI: remove 't' flag from 'guioptions': no tearoff menu entries. -if has('win32') - set guioptions-=t -endif - -" Don't use Ex mode, use Q for formatting. -" Revert with ":unmap Q". -map Q gq - -" CTRL-U in insert mode deletes a lot. Use CTRL-G u to first break undo, -" so that you can undo CTRL-U after inserting a line break. -" Revert with ":iunmap <C-U>". -inoremap <C-U> <C-G>u<C-U> - -" In many terminal emulators the mouse works just fine. By enabling it you -" can position the cursor, Visually select and scroll with the mouse. -if has('mouse') - set mouse=a -endif - -" Switch syntax highlighting on when the terminal has colors or when using the -" GUI (which always has colors). -if &t_Co > 2 || has("gui_running") - " Revert with ":syntax off". - syntax on - - " I like highlighting strings inside C comments. - " Revert with ":unlet c_comment_strings". - let c_comment_strings=1 -endif - -" Only do this part when Vim was compiled with the +eval feature. -if 1 - - " Enable file type detection. - " Use the default filetype settings, so that mail gets 'tw' set to 72, - " 'cindent' is on in C files, etc. - " Also load indent files, to automatically do language-dependent indenting. - " Revert with ":filetype off". - filetype plugin indent on - - " Put these in an autocmd group, so that you can revert them with: - " ":augroup vimStartup | au! | augroup END" - augroup vimStartup - au! - - " When editing a file, always jump to the last known cursor position. - " Don't do it when the position is invalid, when inside an event handler - " (happens when dropping a file on gvim) and for a commit message (it's - " likely a different one than last time). - autocmd BufReadPost * - \ if line("'\"") >= 1 && line("'\"") <= line("$") && &ft !~# 'commit' - \ | exe "normal! g`\"" - \ | endif - - augroup END - -endif - -" Convenient command to see the difference between the current buffer and the -" file it was loaded from, thus the changes you made. -" Only define it when not defined already. -" Revert with: ":delcommand DiffOrig". -if !exists(":DiffOrig") - command DiffOrig vert new | set bt=nofile | r ++edit # | 0d_ | diffthis - \ | wincmd p | diffthis -endif - -if has('langmap') && exists('+langremap') - " Prevent that the langmap option applies to characters that result from a - " mapping. If set (default), this may break plugins (but it's backward - " compatible). - set nolangremap -endif -set number relativenumber -filetype plugin indent on -vnoremap <silent><Leader>y "yy <Bar> :call system('xclip', @y)<CR> -set clipboard=unnamedplus